step-deck-trailer
0 0
Read Time:7 Minute, 52 Second

The main use of step deck trailer is to transport cargo that exceeds the height limitations of traditional flatbed trailers. This trailer type is designed to carry taller freight without special permits, saving drivers and logistics managers time and money on transportation.

There are several different types of step deck trailers to choose from, including fixed neck, gooseneck and removable gooseneck (RGN) options. You’ll need to consider your loading and unloading needs before deciding which trailer is right for you.

Tall Loads

The main use of step deck trailer is to carry tall loads that are too tall for standard flatbed trailers. This type of trailer was designed to provide a safer alternative to transporting cargo that exceeds the height limits on traditional flatbeds. Using this type of trailer, drivers can avoid height permits, which saves customers, drivers and logistics managers time and money.

Another advantage of step decks is that they are easier for forklifts to load and unload. Because they sit closer to the ground, forklift operators don’t need to raise their forks as high as on standard flatbed trailers, making it a safer process for everyone involved.

Some trucking companies offer a variety of different types of trailers to meet the specific needs of their clients. These may include single, double, or triple drop step decks as well as a spread axle configuration to meet state regulations in California and other states with weight-per-axle restrictions.

Step decks also come in different widths and lengths, depending on the commodities they are hauling. For example, if you need to ship long materials, a stretch step deck is an option that extends the bottom deck of the trailer.

In addition, step deck trailers can be equipped with ramps, either permanently attached or movable, to facilitate loading and unloading equipment. Some of these ramps flip down and back up on a beavertail platform, which can make it easier to load or unload heavy items without taking up additional space underneath the trailer.

For other equipment, a step deck can have load levelers built into the upper and lower decks to support and secure the load on the trailer. These products can also help reduce the risk of damage by providing extra support for the load and extending the length of the upper deck.

Step decks can be constructed with a variety of materials, from aluminum to steel. In areas that are known for high levels of road salt, aluminum is a better choice because it is more corrosion-resistant than steel. Similarly, if you will be shipping materials that will be exposed to high temperatures, a steel trailer will be more durable than an aluminum one.

Heavy Loads

There are many different types of trailers available to transport freight, and the main use for a step deck trailer is to carry heavy loads. These trailers have a lower deck that can accommodate loads up to 11 feet tall, so they can be a great option for transporting machinery and construction equipment.

These trailers are also commonly called drop deck trailers, and they are designed to haul freight that cannot be transported on flatbeds due to height restrictions. In addition, they have lower weight limits and can be more affordable than other hauling trailers.

The main difference between a step deck trailer and a flatbed is their size. They are able to accommodate freight up to 10 feet and 2 inches in height, which is more than what a standard flatbed can handle.

As a result, these trailers are ideal for hauling items that are too tall for flatbeds to pass under low bridges or other obstacles. These trailers can be used to move a wide range of products, including pipe, machinery, turbines and more.

When working with a step deck trucking company, you should know the dimensions and characteristics of your load so that the hauler can ensure that it is safe and secure. This will help to avoid accidents, delays, and fines, as well as protect the cargo and other drivers on the road.

You should also understand the maximum weight and dimensions of your load before requesting transport services. This will help you to determine which type of trailer is right for your needs.

For example, you might want to work with a step deck trucking company if you need to send a large water desalination unit that weighs more than 4,800 tons. This would be a huge load, and it’s important to find a trailer that can handle it safely and securely.

If you’re not sure which type of trailer is right for your load, our professional transportation managers can answer any questions you have about the best options for you. We can help you get a quote for your specific transport needs, and we can assist with obtaining permits, route plans, and any other special requirements that may be necessary for your haul. We can even provide specialty services, like escorts or pilots for your haul.

Wide Loads

If your haul is going to exceed the limits of a standard flatbed trailer, then you may want to look into a step deck trailer. These trailers are typically designed to carry wide loads, which means that they can handle cargo that is much taller than a normal flatbed.

Using a step deck can help your load to avoid height restrictions, which makes it easier for you to transport these loads without having to apply for additional permits. Moreover, these trailers can also be safer to use when transporting large pieces of equipment with forklifts.

A step deck trailer is also more affordable than a flatbed, so it can be a good option for freight that is going to be carried on a regular basis. However, this trailer is not suitable for all freight types and should only be used when there are certain factors that make it a more appropriate choice for your haul.

To keep your truck safe on the road, most states require you to display a black and yellow oversize load banner at the front and rear of your vehicle whenever you are hauling wide loads. Depending on the state, you may also be required to carry lights when you are hauling these loads.

When you are transporting wide loads, you should also ensure that you are meeting all other DOT regulations. These include ensuring that your load is properly secured and that your driver has all the necessary permits. You should also ensure that your truck is equipped with a TWIC card and flags.

Once you have met the requirements of the DOT, then it is time to get your wide load on the road. But before you begin, it is important to understand what wide loads are and how they are regulated by state.

The DOT defines a wide load as any freight that is wider than the dimensions of a regular truck bed. This includes any load that is longer than 53 feet long, or has a weight over 46,000 pounds.

Specialized Loads

The main use of step deck trailer is to carry specialized loads that would be difficult or impossible to transport on a traditional flatbed. These loads include machinery, agricultural equipment, construction materials, and large vehicles.

These types of shipments also require a wide network of people to help make them happen. That includes drivers, escorts, police, cranes, bucket trucks and other logistics experts.

Step decks are one of the most versatile rigs for hauling these oversized loads. They’re able to accommodate loads that are up to 10 feet 2 inches in height and provide more clearance than flatbeds.

They’re not only cost-effective for shipping these oversized cargo pieces, but they also save money on permits. Drivers don’t need to apply for extra permits if they transport these loads on a step deck.

Another reason they’re useful for hauling oversized loads is because they have a lower level than flatbeds, which makes it easier for forklifts to add and remove cargo. This also reduces safety risks for truck drivers.

Whether you’re shipping ag equipment, industrial machinery or other specialized cargo, you’ll need a trucking service that understands how to use step deck trailers and can handle the unique requirements of your shipment. Using the right trucking company can make all the difference between a smooth and successful delivery, and an uneasy or unsafe experience.

A good trucking company will have a load board that’s built to quickly filter and find the best step deck loads available at the best rates, and then book them on your schedule. This will save you time and ensure that your trucking service is always ready to go.

This will also allow you to keep up with the fast pace of today’s trucking industry and stay loaded. The best load boards have all the features you need to keep up, from Rate Insights to route planning and broker credit, plus real-time availability so you can be sure you’re ready to take on any shipment that comes your way.

If you’re not sure which trailer to use for your freight, ask your trucking company or freight broker for their recommendation. They’ll be able to tell you which type of trailers work best for your particular shipments, and how to use them to keep you competitive and maximize your profits.

Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply

Your email address will not be published. Required fields are marked *